CALIFORNIA PROPOSITION 65 CHEMICAL WARNING: Extremely chalking or rust scaled surfaces will require a primer. Do not apply if temperatures are expected to fall below 50✯ within 24 hours of application. 920 Fibered Emulsion will not burn or support combustion in a liquid state. The dried film cures to a tough, flexible, durable finish and will resist variations in temperature and weather.
Do not apply if heavy dew or rain is imminent within 24 hours of application. 920 Fibered Emulsion is a general-purpose coating, manufactured with refined asphalt, clay emulsifiers and selected non-asbestos fibers. Allow a minimum of 36 hours curing prior to backfilling. Apply JETCOAT Fibered Emulsion Roof and Foundation Coating with a brush or roller.To reinforce cracks, sandwich a layer of JETCOAT Resin Treated Multi-Purpose Reinforcing Fabric between subsequent coats. Foundation walls should be thoroughly broomed and rinsed with clean water, ensuring the removal of dirt, dust and loose concrete particles. Allow a minimum of 36 hours between coats. Best results are obtained if two coats are applied with the second coat applied perpendicular to the first. Coat the entire surface using a brush or roller. Remove grease or oil with a detergent and water making sure to thoroughly rinse. Brush or broom away all dust, dirt, loose gravel or debris. Rust-Oleum 380 Non-Fibered asphalt emulsion coating is a premium, water-base protective coating for built-up asphalt roofing and concrete foundations.
Fibered asphalt emulsion Patch#
Repair splits, cracks, weak or leaking areas with JETCOAT All-Weather Roof Patch and Resin Treated Multi-Purpose Reinforcing Fabric, adhering to the directions on the container. When coating roofs, nail down any loose laps or parts. JETCOAT Fibered Emulsion Roof and Foundation Coating is a homogeneous blend of asphalts, mineral stabilizers, water and fibrous reinforcement.This coating will provide a UV and water resistant barrier over metal, concrete, masonry and composition surfaces. Provide a UV and water resistant barrier over metal, concrete, masonry and composition surfaces.
0 kommentar(er)
